Quick Start Guide

Xerox® Auto-Redaction App is a Xerox® Gallery App that allows users to choose from a variety of standard, custom, and country-specific items that will redact information from a document. Phone numbers, Social Security Numbers, emails, names, and more can all be redacted with the touch of a few buttons. When the redaction is complete, users can preview, email, and print the results. Xerox® Auto-Redaction App can be installed on all supported Xerox® devices and is readily available to anyone with a Xerox® App Gallery account.

Xerox® Auto-Redaction App is for use with Xerox® ConnectKey® Technology enabled Multifunction Printers, AltaLink®, and VersaLink® devices.

 

Device Requirements

Throughout this guide, the word “device” is used synonymously and interchangeably with Multifunction Printer and Printer. All devices require the following:

  • Xerox® Extensible Interface Platform (EIP) must be enabled to allow the App to be installed. Devices must support EIP 3.5 or higher.
  • ConnectKey® App Installation (Weblet Install Policy) must be enabled to allow installation of the App.
  • Ensure the device is able to communicate with the Internet.

Note:

  • Some networks require a proxy to communicate with the Internet.
  • If Verification of SSL is enabled on the device, ensure the security certificates are loaded on the device.
  • By default, the Xerox® Solutions Certificates are preloaded on all 2016 Xerox® ConnectKey® Technology-enabled i-Series, AltaLink®, and VersaLink®

For more information on the settings above, refer to the Xerox® App Gallery Online Support at https://www.support.xerox.com/support/xerox-app-gallery.

Installing Xerox® Auto-Redaction App

The following procedure assumes you have created a Xerox® App Gallery account. If you do not have access to a Xerox® App Gallery account, refer to the Xerox® App Gallery Quick Start Guide for instructions on creating an account.

Note: For detailed instructions on adding a device and adding or installing Apps to your Xerox® App Gallery account, see the documentation links at the end of this guide.

  1. Go to the Xerox® App Gallery URL: https://appgallery.services.xerox.com
  2. Select Log in.
  3. Enter a valid Email and Password.
  4. On the devices tab, add a Multifunction Printer or Printer, if necessary.
  5. On the All Apps tab, select the desired app.
  6. Select the Buy button.
  7. Accept the App End User License Agreement (EULA).
  8. Select the devices that you would like to buy the App for and then select Checkout.
  9. Fill out the Billing information and select Place Order. Select Done.
  1. Go to the Xerox® App Gallery URL: https://appgallery.services.xerox.com
  2. Select Log in.
  3. Enter a valid Email and Password.
  4. On the devices tab, add a Multifunction Printer or Printer, if necessary.
  5. On the All Apps tab, select the desired app.
  6. Select the Try It button.
  7. Select the devices that you would like to trial the App on and then select Install.

 

How to Redact a Document

Start Here: If you are running Xerox® Auto-Redaction App for the first time, start by following the steps below.

  1. From the device home screen, touch Xerox® Auto-Redaction.
  2. Once you are on the switchboard of the app, select Custom.
  3. If you want country-specific information redacted, scroll down and select Location.
  4. A location popup appears. Scroll through the list, find a country, and select it. Once it is highlighted, touch OK.
  5. Once you’re back on the main options page, at the top, you will notice that there is a list of items. The first 5 are standard items that can be redacted, no matter the country. Any items after the first 5 are country-specific. Toggle any items you would like redacted from your document.
  6. If there are other items you would like redacted that you don’t see in the initial list, touch Standard Redaction Items.
  7. A popup appears where you can search for new items. Add them to your list by touching the checkbox to the left of the item’s name and then touching OK. Any newly added items will now be toggled in the list of redaction items on the main options page.
  8. To add a custom word or phrase, select Add custom word or phrase. This produces a popup where you can enter a word or phrase that you want redacted.
    Note: There are two types of Match Criteria: Words Containing and Words Matching. Words Containing will redact any word that includes the characters you enter, whereas Words Matching will redact any word that matches the exact, whole word you enter. To change the type, simply touch Match Criteria below the custom text field and select one of the two options.
  9. Touch OK.
  10. Optionally, you can save your preset to be used at a later date. To do so, touch Save Preset. A popup will appear. Enter a name for your preset and touch OK.
  11. At the top of the screen, touch Next.
  12. Adjust your scan and print settings. To see previews of the redacted document, as well as print and email it afterwards, toggle Preview, Print, and Email.
  13. If an email address has not been previously entered during the current session, toggling email in step 12 will produce a popup asking for an email address. Enter an email and touch OK. You can change the default email subject text by touching Subject below the email toggle.
  14. If you toggled Preview in step 12, touch the Preview button at the top of the screen. Otherwise, touch the Scan button.
  15. The app will now scan and redact your document.
  16. If you toggled Preview in step 12, you will be taken to the Preview screen. Once you are done viewing the previews, touch Accept. Otherwise, continue to step 17.
  17. Your document will now print and an email with the redacted document attached will be sent to the address you specified in step 13.

 

The Switchboard

When you are on the switchboard of the app, there will be two options: Presets and Custom. Presets allows you to choose a saved preset, edit it, and then use it to redact a document. Custom lets you redact a document using custom settings, as well as save a preset for later use.

If you wish to learn about the Presets workflow, follow How to Redact a Document Using a Preset. If you’d rather learn about the Custom workflow, follow How to Redact a Document.

 

How to Redact a Document Using a Preset

Note: By default, US Personally Identifiable Information (PII) is the only preset the app comes installed with. If you would like to save and use a preset of your own, please follow the steps in How to Redact a Document.

  1. From the device home screen, touch Xerox® Auto-Redaction.
  2. Once you are on the switchboard of the app, select Presets.
  3. Select a preset from the list. When a preset is selected, details will be displayed on the right.
  4. Touch OK.
  5. If there are changes you want to make to the preset, you can make them now. Otherwise, touch Next.
    Note: If you chose the US Personally Identifiable Information (PII) preset, all redaction items will be toggled off by default. You will need to toggle on any of the ones you want redacted. Furthermore, there are no custom words or phrases associated with the US Personally Identifiable Information (PII) preset by default.
  6. Adjust your scan and print settings. To see previews of the redacted document, as well as print and email it afterwards, toggle Preview, Print, and Email.
  7. If an email address has not been previously entered during the current session, toggling email in step 6 will produce a popup asking for an email address. Enter an email and touch OK. You can change the default email subject text by touching Subject below the email toggle.
  8. If you toggled Preview in step 6, touch the Preview button at the top of the screen. Otherwise, touch the Scan button.
  9. The app will now scan and redact your document.
  10. If you toggled Preview in step 6, you will be taken to the Preview screen. Once you are done viewing the previews, touch Accept. Otherwise, continue to step 11.
  11. Your document will now print and an email with the redacted document attached will be sent to the address you specified in step 7.

 

Support

Xerox® App Gallery Knowledge Base
https://www.support.xerox.com/support/xerox-app-gallery/support/enus.html

Xerox® App Gallery Documentation
https://www.support.xerox.com/support/xerox-app-gallery/documentation/enus.html

Customer Support Forum
https://forum.support.xerox.com

Supported Multifunction Printers (MFPs) and Printers
https://www.xerox.com/en-us/connectkey/apps

© 2019 Xerox Corporation. All rights reserved. Xerox® is a trademark of Xerox Corporation in the United States and/or other countries.